carteret, nj —tuesday, february 17, 2015—fujipoly’s sarcon® 250g-hf2d thermal interface material is manufactured with a reinforced nylon mesh inner layer as well as a low-tac surface treatment. these features prevent die-cut holes from collapsing and help maintain original spec tolerances during final assembly. these material enhancements also reduce tearing, elongation and damage making your production operations faster and easier.

the 2.5mm thick material improves cooling performance by filling unwanted air gaps between board components and processors thereby increasing surface contact with a heatsink.

sarcon® 250g-hf2d transfers heat with a thermal conductivity of 1.5 w/m°k per astm d2326 and a thermal resistance of 2.61°cin²/w at 14.5 psi (16.81°ccm²/w at 100kpa). this flame retardant tim is available in precut sheets up to 300mm x 200mm and can be die-cut or trimmed to fit your components. depending on gap size, additional material thicknesses are available ranging from 0.5mm-5.0mm.

about fujipoly america corporation

fujipoly america corporation is a wholly owned subsidiary of fuji polymer industries co., ltd. of japan. a qs-9000-registered company, fujipoly america corporation specializes in the fabrication of silicone rubber technology. it is a leader in the areas of elastomeric connectors, thermal interface materials, fusible tapes, lcd bezel assemblies, and custom silicon rubber intrusions. fuji polymer industries co., ltd., has eight divisions worldwide, located in north america, europe and asia and an international network of distributors and representatives. the company’s north american operations are based in carteret, new jersey. for more information, call (732) 969-0100(732) 969-0100  or visit us on the web at http://www.fujipoly.com.