Log In   |   Sign up

New User Registration

Article / Abstract Submission
Register here
Register
Press Release Submission
Register here
Register
coolingZONE Supplier
Register here
Register

Existing User


            Forgot your password
John O | October 2016

Diamonds being used to prevent overheating in electronics


researchers from the a*star institute of microelectronics have demonstrated through experiment and computational analysis that a layer of diamond on top of a gallium nitride transistor chip provides optimal heat dissipation.

 

diamond_600

(wikimedia commons)

 

using a thermal test chip with eight hotspots, each .45 by .03 millimeters, according to a report on phys.org, the researchers generated heat in an actual device. a diamond created by chemical vapor deposition was bonded to the chip. according to the researchers, “using the diamond heat spreader, to dissipate 70-w heating power, the maximum chip temperature can be reduced by 40.4 percent and 27.3 percent, compared with the structure without a heat spreader and the one with a copper heat spreader, respectively.”

 

the results of the experiment were demonstrated again in thermal simulations that also noted increasing the width of the diamond layer can increase the dissipation of heat across the chip.

 

the full abstract from the research paper, which was original published in ieee transactions on components, packaging and manufacturing technology in december 2015, read,

 

“a diamond heat spreader has been applied on the hybrid si microcooler for the improvement of the hotspots cooling capability for gan devices. the microwave chemical vapor deposition diamond heat spreader under tests is of thickness 400 μm and thermal conductivity as high as 1500 ~ 2000 w/mk, and is bonded through the thermal compression bonding process at chip level.

 

"eight hotspots, each of size 450 × 300 μm2, were fabricated on a si thermal test chip to mimic the heating areas of eight gan units. heat dissipation capabilities were studied and compared through experimental tests and thermal/fluid simulations, and consistent results have been obtained. using the diamond heat spreader, to dissipate 70-w heating power, the maximum chip temperature can be reduced by 40.4% and 27.3%, compared with the structure without a heat spreader and the one with a copper heat spreader, respectively.

 

"while maintaining the maximum hotspot temperature under 160°c, 10-kw/cm2 hotspot heat flux can be dissipated. the thermal effects of the heat spreader thickness, the diamond thermal conductivity, and the bonding layer are investigated. based on the simulation results, the higher power density of the gan device can be dissipated, while maintaining the peak gate temperature under 200°c.

 

"the concentrated heat flux has been effectively reduced using a diamond heat spreader, and much better cooling capability of the si microcooler has been achieved for high-power gan devices.”

 

read the phys.org article at http://phys.org/news/2016-10-layer-diamond-high-power-electronic-devices.html. the full report from the researchers can be found at http://ieeexplore.ieee.org/document/7294662

Choose category and click GO to search for thermal solutions

 
 

Subscribe to Qpedia

a subscription to qpedia monthly thermal magazine from the media partner advanced thermal solutions, inc. (ats)  will give you the most comprehensive and up-to-date source of information about the thermal management of electronics

subscribe

Submit Article

if you have a technical article, and would like it to be published on coolingzone
please send your article in word format to [email protected] or upload it here

Subscribe to coolingZONE

Submit Press Release

if you have a press release and would like it to be published on coolingzone please upload your pr  here

Member Login

Supplier's Directory

Search coolingZONE's Supplier Directory
GO
become a coolingzone supplier

list your company in the coolingzone supplier directory

suppliers log in

Media Partner, Qpedia

qpedia_158_120






Heat Transfer Calculators