Log In   |   Sign up

New User Registration

Article / Abstract Submission
Register here
Register
Press Release Submission
Register here
Register
coolingZONE Supplier
Register here
Register

Existing User


            Forgot your password
December 2005
library  >  PAPERS  >  Theoretical/General

The thermal conductivity of gases


the value of thermal conductivity for most gases and vapors range between 0.01 and 0.03 w/mk at room temperature. notable exceptions are helium (0.15) and hydrogen (0.18).

 

the most common theoretical explanation of heat conduction in gases is provided by the kinetic gas theory, which treats the collisions between the atoms or molecules as the prime mode of transfer of energy. radiative heat transfer is neglected in this approach.

 

according to this theory, the thermal conductivity is proportional to the heat capacity per unit volume, the average gas velocity, and the mean free path. as the dynamic viscosity is proportional to the product of density, velocity and mean free path, it follows that the thermal conductivity is also proportional to the viscosity. in practice, the relationships are much more complicated and a high accuracy is not to be expected by deriving the thermal conductivity from the much more easily measured physical properties mentioned above.

 

with regard to the temperature dependency of the thermal conductivity, it is noted that its value increases roughly in proportion with the absolute temperature, at least in the range of 'normal' pressures. as pressure increases, so too does the thermal conductivity. at approximately 0.001 bar, the mean free path becomes of the same order as the walls confining the gas and the value increases linearly with pressure. above 0.001 bar, the increase in thermal conductivity is of the order of magnitude of 1% per bar increase of pressure. from these figures, it can be concluded, for example, that changes in thermal conductivity due to atmospheric variations can be neglected in most cases.

 

the following table gives the thermal conductivity at room temperature for a variety of gases.

 

 

clemens j.m. lasance
associate editor
philips research laboratories

 


erratum:

 

a few readers noticed that unfortunately there were two errors in the last technical brief about the thermal conductivity of silicon. the first one concerns the graph - the two axes had been interchanged. the second relates to the units of the equation: the value calculated is in w/cmk, not in w/mk. please accept my apologies for any inconvenience.

Choose category and click GO to search for thermal solutions

 
 

Subscribe to Qpedia

a subscription to qpedia monthly thermal magazine from the media partner advanced thermal solutions, inc. (ats)  will give you the most comprehensive and up-to-date source of information about the thermal management of electronics

subscribe

Submit Article

if you have a technical article, and would like it to be published on coolingzone
please send your article in word format to [email protected] or upload it here

Subscribe to coolingZONE

Submit Press Release

if you have a press release and would like it to be published on coolingzone please upload your pr  here

Member Login

Supplier's Directory

Search coolingZONE's Supplier Directory
GO
become a coolingzone supplier

list your company in the coolingzone supplier directory

suppliers log in

Media Partner, Qpedia

qpedia_158_120






Heat Transfer Calculators