june, 2015 - with the advantage of pin fin led coolers under tilted position, mechatronix announces 2 more diameters as standard available.this second generation pin fin coolers is developed for an optimized free air convection under tilted positions of spot and track lights over 45 degrees.typically under heavy inclined positioning led coolers need a far more open structure at the side to prevent obstruction of hot raising air.

mechatronix is keen on developing situation specific led coolers per led brand, and offers in this way an optimal performance which exceeds existing cooling platforms with over 30%.as an example they launch now the lpf67 and lpf86 advanced pin fin coolers. in a diameter of 67mm and 86mm, these advanced led coolers keep respectively 3500 lumen and 4500 lumen spot and track lights on the required case and junction temperature even under a full horizontal 90 degrees positioning.

the lpf47 and lpf67 advanced led pin fin coolers are standard foreseen from zhaga book 3 and zhaga book 11 mounting holes, as well as an advanced pattern for direct mounting of cob led modules. besides better performance under tilted position the weight of these led pin fin coolers is far lower than extruded star shaped led coolers with similar performance. the diameter of 86mm was typically chosen during development to create a 3000 to 4500 lumen passive replacement for tilted active cooled track and spot lights from the past. a few months ago mechatronix launched a similar diameter 86mm star shaped led cooler, the moduled micro, for similar replacement of active cooled spot and down lights under vertical position. now with this next generation pin fin cooler it seems active cooling is completely banned in spot and down light applications.

to download pdf click here

contact

mechatronix kaohsiung co., ltd no.818,

dashun 2nd rd., sanmin dist.,

kaohsiung city 80787, taiwan

tel: +886-7-381-5892 fax: +886-7-383-9293
e-mail : [email protected]

www.mechatronix-asia.com vat 28600841

about

in the broad world of manufacturing making choices while you have all manufacturing processes in house is not easy.
therefore we focus less on markets and more on service and quality levels. cosmetic designs with a high quality level and a high proportion of technical skills, a challenge where customer doubts it is suitable for far east production, that is what we look for!